28 comments on “AR-15 — Methods For Zeroing A2 Type Sights

  1. OUTSTANDING procedures that ALL others I’ve read (and failed) are completely confusing not to mention even if one isn’t familiar with BDC sights that’s obviously wrong. Now maybe I’ll really start using my le6920 across the course and know this site as goood as my M1A’s. THANKS again.

    Liked by 1 person

    • Kick ass. I’m glad that it helped. I had a 20″ Colt HBAR for 15 years and I never really understood the nuances of the sight system. After all of this research and experimenting I hate that I sold it. I now have a 16″ Smith & Wesson M&P Sport that I purchased so that my kids could wear out the barrel with steel case ammo and .22LR with a conversion kit. I put a Rock River Arms A-2 sight on it and set it up with the Revised Improved BZ Method. I have an exact setting for 25 meters (I can’t shoot enough to tell a difference at 25 yards), 50 yards, and 100 yards. I can then put it on the “3” or “4” setting and hit steel targets at 300 and 400 yards. I’m pretty sure that I’m making occasional 500 yard hits, but 5.56mm doesn’t hit the steel hard enough at that distance to be heard very well. The next time that we are shooting it at the range I’ll have someone spot it for me and let me know if I’m getting hits.

      Please keep us posted how it works for you.

      Like

  2. Fantastic article on the sighting options! It is a one stop shop for dialing in the irons. I have some questions on the 20 inch rifle running the RIBZ zero. If you set rear sight knob at “Z” setting for the 25 meters (27 yards) sight in, wouldn’t the 25 and 300 meter adjustment = “Z” setting instead of 25 meters = “Z” and 300 meters = 6/3 setting? Sorry too many years of shooting the A2 8/3 with Army’s 25/300 meter BZO. Trying to learn some new dope with that goofy 6/3 knob on an 20 inch rifle is a bit confusing at the moment. Thanks for taking time to write such a detailed and very helpful article.

    Like

    • Hi, Jerry.

      I’m glad that you found it helpful. It took a lot of research and experimenting to put it all together.

      To answer your question, the ONLY time that you use the “Z” setting is when you are zeroing a 20″ barrel rifle with a removable carry handle at 25 yards. When a 20″ rifle and removable carry handle combination is properly zeroed so that the bullets impact at point-of-aim at each setting (300 meters with the “3”, 400 meters with the “4”, etc.), then the near zero with the 6/3 setting is not 25 meters like it is with a 20″ barrel and fixed carry handle. It is somewhere around 31 meters. The “Z” setting lets you still use a 25 meter range and targets and properly zero your 20″ barrel and removable carry handle combo.

      Any time that you would practice with your rifle on a 25 meter range, then you would use the “Z” setting, but that would be the only time.

      Let us know how that works out for you.

      SA

      Like

  3. More of a question then anything else, I use a cross hair front sight post instead of the issued post. Would the formula change & if so, how? P. S. 16″, 55 gr. fixed carry handle.

    Like

  4. Great article, clearly written and easy to understand. I read the entire essay after spending the better part of a day struggling with partial descriptions, generic terms and a general lack of specific information on barrel length, sight distance or ammunition type. Most sources only refer to 20” rifles or refer to M4 carbine with no barrel length specified or only 14.5”. I have a Rock River Arms Mid Length A4 with a 16” barrel so your specific explanations with regard to barrel length, sight distance and ammunition were greatly appreciated. I also appreciated the background philosophy behind each sighting method. Yours was the only source I found that brought all the techniques together comparing them and explaining the differences. I have friends with a variety of different AR-15 configurations so I will be sharing your experience with them also. Thanks for your work in sorting out all the details.

    Liked by 1 person

    • You are very welcome. I hope that it helps you out. I was very confused when I first started researching the subject. Everyone is an expert on the subject, and yet I’ve never been able to get anyone to explain why they do it that way (“that is the way we did it in ‘Nam”, or “that is the way we did it in the Corps”. Not explanation why they did it that way, or what results you could expect by doing it that way.

      Like

    • The ONLY time that you use the “z” is with a rifle with a 20″ barrel and removable carry handle while zeroing at 25 meters. If you modify you sight as the USMC does, or as with the Santos method, you can still zero with the “z” at 25 yards with a 20″ barrel.

      Confused yet?

      Like

  5. I would like to sight in my A2 using the Santos method. I have one point I am confused on. When doing the sighting in adjustments at 50 yards I understand I will be using the front sight post to raise or lower the strike of the projectile but which rear sight aperture will I be using? If I am reading it correctly the small aperture will be flipped down and I will be using the 0-200 large aperture.

    Like

  6. So I have a Colt 727 clone. 14.5 barrel and a A2 8/3 fixed rear… What do I set the rear sight clicks at to do the Army 25/300 zero?

    You cover 20″ fixed, and 14.5 detachable but not 14.5 fixed.

    Like

    • Geez… that is a rare combination… Blackhawk Down style.

      I would set it to the 8/3 setting and zero at 25 meters (27.3 yards) with 62 grain ammo.

      You won’t use the “z” setting because that is only used with 20″ barrels to compensate for the increased projectile velocity that you enjoy from a longer barrel.

      Do you have a 100 meter (109 yard) rifle range to verify zero? After zeroing at 25 meters with the 8/3 setting your rounds should hit 4.6″ high at 100 meters.

      Like

      • “Blackhawk Down style” That was exactly what I was going for!

        I do have a 100m range will try the normal 8/3 at 25m. Thanks!

        Like

  7. Came back to use these instructions again after finding it and using it for me LE6920 (it WORKS). Again, this is by far the best most carefully written zeroing procedure out here. Molon did a good job, but when you throw in 50-100 of guys with different definitions of A1/2/3/4, then different barrel lengths often not referenced, bullet weights not referenced against the the drop charts and assumed in thread/questions, FS post heights, and more (less)… then throw it all together, what you get is guys thinking they “got it”. These AR15, M4 sights, subtle differences between different models can be damn tricky. They sure as hell are compared to my M1A’s which which are a snap to zero when the barrel/s are properly indexed to the gas ports which John Garand, H&R, SA, TRW, WIN had down. The sights the byproduct of a mechanical engineering genius who designed those sights for dimwits like me. Savanah here via this right up gets the AR equal to that procedure that I printed off and shared with several guys each after using it echoing me exact sentiments. THANKS AGAIN.

    Like

Leave a Reply to Jerry Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.